NWR Products

QuikLaze ST

FPD Laser Repair Systems

QuikLaze ST is an ideal productivity tool for FPD repair applications such as removal of shorts and defects.
The QuikLaze ST laser system features the latest Advanced Beam Delivery System (ABDS) from New Wave Research. ABDS gives you highly precise control over each of the four wavelengths (Infrared, Green, UV3(355 nm) or UV4(266 nm) that the system offers. QuikLaze ST is the only laser system that offers one, two, or three switch-selectable wavelengths in a single laser. This allows the system to operate as though it were a single wavelength laser, while having the ability to easily switch to the wavelength that best suits the specific repair application.

The QuikLaze ST offers repetition rates from single shot to 50 Hz continuous for fast throughput. The stepper motor shutter control provides excellent shutter repeatability and uniformity. The Optional Rotational Aperature offers the additional ability to repair shorts and defects at non-orthogonal angles from -90° to +90° in 1° increments. Additional options include polarization compensation for cell repair, and closed-loop energy control.

Features

Repetition rate of 1 Hz to 50 Hz
Multiple wavelengths give more precise control of specific applications
      UV3: remove polyimide or nitride
      UV4: remove polyimide or nitride
      Green: cut large metal buses or small circuit lines
      IR: cut ITO on LCD materials
Superior pulse stability for uniform cuts and accurate results
Available in single and multi-wavelength systems. Six different task-specific models are available.

* US Patents #5,611,946 and #5,703,713

Specifications

Wavelength		1064 nm	532 nm	355 nm	266 nm
Pulse Width		3 - 5 ns	3 - 4 ns	3 - 4 ns	3 - 4 ns
Energy (before microscope)	IR	0.6 mJ
	Green		0.6 mJ
	IR/Green	0.6 mJ	0.6 mJ
	Green/UV3		0.6 mJ	0.6 mJ
	Green/UV4		0.6 mJ		0.25 mJ
	TriLite UV3	0.5 mJ	0.5 mJ	0.4 mJ
Min. cut size (100x objective)		2 x 2 µm	1 x 1 µm	1 x 1 µm
Max. cut size (single pulse)		50 x 50 µm with 50x objective (Mitutoyo) 40 x 40 µm with 50NUV objective @ 355nm 30 x 30 µm with 50UV objective @ 266nm
Dimensions	Head	6.26" (159 mm) W x 11.51" (292 mm) H x 3.29" (83.6 mm) L; camera adapter requires additional 3.5" (89 mm) clearance
	Power Supply	7.65" (194 mm) W x 11.25" (286 mm) H x 14.5" (368 mm)L
	Remote Control	5" (127 mm) W x 3.25" (83 mm) H x 7" (178 mm) L
Weight	Head	8 lb. (3.6 kg)
	Power Supply	30 lbs. (13.6 kg)
	Remote Control	2 lbs (.9 kg)
External Control		RS232 (DB 9 connector), ASCII commands, TTL(Firelaser)